Magnetau AlNiCo Parhaol Alwminiwm, Nicel, Cobalt ac aloi Haearn
Disgrifiad o'r Cynnyrch
Mae AlNiCo Magnet (aloi alwminiwm, nicel, cobalt a haearn) yn cael ei sicrhau trwy broses castio, wedi'i siapio mewn mowldiau tywod resin ffenolig rhad.Gall weithredu mewn amgylcheddau hyd at 500 ° C gydag ymwrthedd da iawn yn erbyn cyrydiad, felly anaml y mae angen haenau.
Mae'r siapiau terfynol nodweddiadol fel blociau, silindrau, modrwyau ac arcau yn cael eu sicrhau trwy brosesau torri a malu blociau safonol wedi'u gwasgu neu rannau cywasgu unedol wedi'u mowldio ymlaen llaw.Gellir cael goddefiannau mân iawn, er, oherwydd ei freuder uchel, mae'n rhaid ei drin a'i gydosod yn ofalus i osgoi sglodion a chraciau.
Mae magnetau AlNiCo yn chwarae rhan hanfodol mewn llawer o gynhyrchion diwydiannol a defnyddwyr.Gallwch ddod o hydAlNiComagnetau mewn moduron trydan, pickups gitâr trydan, meicroffonau, synwyryddion, seinyddion, tiwbiau tonnau teithio, magnetau buwch, ac ati.
| Eitem | Gradd | Ymsefydlu gweddillion | Grym gorfodol | Grym gorfodol cynhenid | Uchafswm cynnyrch ynni | Temp Gweithio | Dwysedd | Sylw | ||||
| Br | Hcb | Hcj | (BH)uchafswm | Tw | ρ | |||||||
| T | KGs | kA/m | KOe | KA/m | KOe | KJ/m3 | MGOe | °C | g/cm3 | |||
| Sintered AINiCo | AlNiCol0/5 | 0.60-0.63 | 6.0-6.3 | 48-52 | 0.60-0.65 | 52-56 | 0.65-0.7 | 8-10 | 1.00-1.25 | ≤450 | 6.8 | Isotropig |
| AlNiCol2/5 | 0.70-0.75 | 7.0-7.5 | 48-56 | 0.60-0.70 | 52-58 | 0.65-0.73 | 11-13 | 1.4-1.6 | ≤450 | 7.0 | ||
| AlNiCol4/8 | 0.55-0.60 | 5.5-6.0 | 75-91 | 0.95-1.15 | 80-95 | 1.0-1.2 | 14-16 | 1.75-2.0 | ≤550 | 7.0 | ||
| AlNiCo20/10 | 0.60-0.64 | 6.0-6.4 | 93-110 | 1.16-1.38 | 100-118 | 1.25-1.4 | 18.0-22.4 | 2.25-2.8 | ≤550 | 7.0 | ||
| AlNiCo28/6 | 1.0-1.12 | 10.0-11.2 | 56-64 | 0.7-0.8 | 58-66 | 0.73-0.83 | 28-32 | 3.5-4.0 | ≤550 | 7.2 | Anisotropig | |
| AlNiCo34/5 | 1.15-1.23 | 11.5-12.3 | 48-56 | 0.60-0.70 | 49-57 | 0.62-0.72 | 32-36 | 4.0-4.5 | ≤550 | 7.2 | ||
| AlNiCo37/5 | 1.19-1.27 | 11.9-12.7 | 48-56 | 0.60-0.70 | 49-57 | 0.62-0.72 | 36-38 | 444.8 | ≤550 | 7.2 | ||
| AlNiCo40/5 | 1.22-1.26 | 12.2-12.6 | 50-56 | 0.62-0.7 | 51-57 | 0.64-0.72 | 38-40 | 4.8-5.0 | ≤550 | 7.2 | ||
| AlNiCo40/10 | 0.95-1.0 | 9.5-10.0 | 100-110 | 1.25-1.38 | 104-114 | 1.3-1.43 | 40-44 | 5.0-5.5 | ≤550 | 7.1 | ||
| AlNiCo38/11 | 0.80-0.85 | 8.0-8.5 | 111-121 | 1.40-1.52 | 114-125 | 14.3-15.7 | 38-40 | 4.8-5.0 | ≤550 | 7.1 | ||
| AlNiCo36/15 | 0.70-0.75 | 7.0-7.5 | 140-160 | 1.75-2.0 | 154-174 | 1.93-2.18 | 36-45 | 4.5-5.6 | ≤550 | 7.0 | ||
| AlNiCo40/16 | 0.7-0.75 | 7.0-7.5 | 160-175 | 2.0-2.2 | 174-189 | 2.18-2.37 | 40-44 | 5.0-5.5 | ≤550 | 7.0 | ||
| AlNiCo40/12 | 0.83-0.90 | 8.3-9.0 | 120-132 | 1.50-1.65 | 124-136 | 1.57-1.71 | 40-44 | 5.0-5.5 | ≤550 | 7.1 | ||
| AlNiCo45/13 | 0.89-0.91 | 8.9-9.1 | 120-132 | 1.50-1.65 | 126-138 | 1.58-1.73 | 44-50 | 5.5-6.2 | ≤550 | 7.1 | ||
